Instructions
Ancient Chams setup guide for Escape from Tarkov
Ancient Chams • Escape from Tarkov
Launching ANCIENT CHAMS for Escape from Tarkov: turn on the overlay, disable your antivirus, run the loader, paste your key and click inject.
Instructions
Turn on the overlay, disable your antivirus, run the loader, paste your key and click inject. After the loader closes, launch the game; the menu opens with the Insert key.
Turn on the overlay (before launching)
1. One of the overlays must be running before launch. NVIDIA graphics cards support NVIDIA App and SteelSeries, AMD cards support SteelSeries only.
2. NVIDIA App (download): open the settings, the Generals tab, and enable IN-GAME OVERLAY. Doesn't work in fullscreen mode.
3. SteelSeries (download), fullscreen mode is supported: in the settings, under GENERAL → General, enable Sonar, then in SONAR → Shortcuts bind Master - Volume Up to any key, for example F7. Press this key before injecting.
4. Medal (download) is only needed for WARDOGS: download the overlay and sign up. Users in Russia will need a VPN. Fullscreen mode is not supported.
5. Discord (doesn't support fullscreen mode): in the settings, under "Game Overlay", turn on the overlay, turn off "Legacy Overlay" and turn on "Hardware Acceleration" (System → General, the fourth item). If the "Current Activity" section says "No overlays available", turn the overlay off and on again.
2. NVIDIA App (download): open the settings, the Generals tab, and enable IN-GAME OVERLAY. Doesn't work in fullscreen mode.
3. SteelSeries (download), fullscreen mode is supported: in the settings, under GENERAL → General, enable Sonar, then in SONAR → Shortcuts bind Master - Volume Up to any key, for example F7. Press this key before injecting.
4. Medal (download) is only needed for WARDOGS: download the overlay and sign up. Users in Russia will need a VPN. Fullscreen mode is not supported.
5. Discord (doesn't support fullscreen mode): in the settings, under "Game Overlay", turn on the overlay, turn off "Legacy Overlay" and turn on "Hardware Acceleration" (System → General, the fourth item). If the "Current Activity" section says "No overlays available", turn the overlay off and on again.
Preparing Windows
1. Disable your antivirus; to avoid dependency loading errors, uninstall all antivirus software and anti-cheats.
2. Uninstall the Vanguard and Faceit anti-cheats if they are installed.
3. Install the Visual C++ library: vc_redist.x64.
4. The system drive must be GPT, and the BIOS must be in UEFI mode. For virtualization, enable Intel VT-X / AMD-V in BIOS.
2. Uninstall the Vanguard and Faceit anti-cheats if they are installed.
3. Install the Visual C++ library: vc_redist.x64.
4. The system drive must be GPT, and the BIOS must be in UEFI mode. For virtualization, enable Intel VT-X / AMD-V in BIOS.
Download and launch
1. Download the loader: the loader.
2. Disable your antivirus and run the loader.
3. Paste your key.
4. Press Inject (inject).
5. After the injection, the loader closes by itself: this means you can launch the game.
6. The menu opens with Insert.
2. Disable your antivirus and run the loader.
3. Paste your key.
4. Press Inject (inject).
5. After the injection, the loader closes by itself: this means you can launch the game.
6. The menu opens with Insert.
Common errors
Please launch SteelSeries moment overlay (FOR GEFORCE) — turn the GeForce overlay off and on again.
Please launch SteelSeries Sonar overlay (FOR STEELSERIES) — press your Sonar bind before launching so the overlay starts working.
Menu flickering or black screens in the game — open SteelSeries → Settings → MOMENTS → Capture and Sound and turn off "ALLOW MOMENTS TO CAPTURE WHILE GAMING".
Please disable Intel Rapid Storage Technology — you need to disable Intel RST.
The bind button does not work — reinject. If that doesn't help, run the overlay as administrator.
The menu doesn't appear or the loader closes right after opening — install the Visual C++ x64 library (link above).
Unsupported Firmware / Unsupported firmware — convert the system drive to GPT (with the built-in mbr2gpt utility or another disk tool) and switch the BIOS from Legacy to UEFI.
0x296 — reinject.
Unknown network error — an internet problem: check your connection and try again. A VPN may be interfering.
Failed to allocate memory / to map memory(x). Please reboot pc and try again — the driver was not installed correctly: restart your PC and try again (if you're in an internet cafe and the error repeats, try another PC). If that doesn't help, clean up your startup programs. You can download Autoruns and disable all non-system startup programs: sometimes drivers of uninstalled programs stay in the system.
Failed to load dependencies(x)(-x). Make sure all antiviruses are disabled — turn off all protection and uninstall all anti-cheats and antivirus software (every single one). If that doesn't help, clean up your startup programs.
Please uninstall Vanguard/Faceit first — uninstall the Vanguard or Faceit anti-cheat and try again.
AES instruction set is not supported — your CPU doesn't support the AES instruction set; this can't be fixed.
Please enable Intel VT-X/AMD-V in the BIOS — enter BIOS and enable "Intel virtualization technology", or "Intel VT-X" / "AMD-V", or "SVM mode".
VMX/SVM is not supported — in "Control Panel" → "Programs and Features" → "Turn Windows features on or off", make sure "Virtual Machine Platform" and "Hyper-V" are turned off. If the error persists, open cmd as administrator, type bcdedit /set hypervisorlaunchtype off, press Enter and restart your computer.
Either virtual or RAID disk is present. Please revert it back to normal state — turn off the spoofer or turn off RAID in BIOS (this requires a full Windows reinstall).
CRD failed at XXX with code XXXXXXXX / Failed to init render — on a desktop PC, this means your graphics card is old and not supported. On laptops, you need to disable the integrated graphics in BIOS.
Incorrect HWID — open cmd as administrator and enter one at a time wmic diskdrive get Caption, SerialNumber and wmic baseboard get SerialNumber. If none of the commands failed but the problem persists, something is wrong with your PC: try reinstalling Windows.
Any other error — contact support: https://t.me/CheatForce_support_bot
Please launch SteelSeries Sonar overlay (FOR STEELSERIES) — press your Sonar bind before launching so the overlay starts working.
Menu flickering or black screens in the game — open SteelSeries → Settings → MOMENTS → Capture and Sound and turn off "ALLOW MOMENTS TO CAPTURE WHILE GAMING".
Please disable Intel Rapid Storage Technology — you need to disable Intel RST.
The bind button does not work — reinject. If that doesn't help, run the overlay as administrator.
The menu doesn't appear or the loader closes right after opening — install the Visual C++ x64 library (link above).
Unsupported Firmware / Unsupported firmware — convert the system drive to GPT (with the built-in mbr2gpt utility or another disk tool) and switch the BIOS from Legacy to UEFI.
0x296 — reinject.
Unknown network error — an internet problem: check your connection and try again. A VPN may be interfering.
Failed to allocate memory / to map memory(x). Please reboot pc and try again — the driver was not installed correctly: restart your PC and try again (if you're in an internet cafe and the error repeats, try another PC). If that doesn't help, clean up your startup programs. You can download Autoruns and disable all non-system startup programs: sometimes drivers of uninstalled programs stay in the system.
Failed to load dependencies(x)(-x). Make sure all antiviruses are disabled — turn off all protection and uninstall all anti-cheats and antivirus software (every single one). If that doesn't help, clean up your startup programs.
Please uninstall Vanguard/Faceit first — uninstall the Vanguard or Faceit anti-cheat and try again.
AES instruction set is not supported — your CPU doesn't support the AES instruction set; this can't be fixed.
Please enable Intel VT-X/AMD-V in the BIOS — enter BIOS and enable "Intel virtualization technology", or "Intel VT-X" / "AMD-V", or "SVM mode".
VMX/SVM is not supported — in "Control Panel" → "Programs and Features" → "Turn Windows features on or off", make sure "Virtual Machine Platform" and "Hyper-V" are turned off. If the error persists, open cmd as administrator, type bcdedit /set hypervisorlaunchtype off, press Enter and restart your computer.
Either virtual or RAID disk is present. Please revert it back to normal state — turn off the spoofer or turn off RAID in BIOS (this requires a full Windows reinstall).
CRD failed at XXX with code XXXXXXXX / Failed to init render — on a desktop PC, this means your graphics card is old and not supported. On laptops, you need to disable the integrated graphics in BIOS.
Incorrect HWID — open cmd as administrator and enter one at a time wmic diskdrive get Caption, SerialNumber and wmic baseboard get SerialNumber. If none of the commands failed but the problem persists, something is wrong with your PC: try reinstalling Windows.
Any other error — contact support: https://t.me/CheatForce_support_bot