Instructions
Evicted Macros setup guide for Rust
Evicted Macros • Rust
How to launch EVICTED MACROS for Rust: the script runs from a USB flash drive (physical or virtual) before Steam and Rust.
Instructions
The script runs from a USB flash drive (physical or virtual) before Steam and Rust. The order matters: the script first, then Steam, then Rust. If Steam or Rust is already running, you risk a ban.
Preparing your PC
1. Uninstall programs that interfere with the loader: Wireshark, Process Hacker and HTTP debuggers (Fiddler, Charles, mitmproxy and the like).
2. Install an archiver (WinRAR is best, 7-Zip also works). Unpack archives into a separate folder and don't run files directly from an archive.
3. Disable Windows Defender: Windows Security → Virus & threat protection → Manage settings → set Real-time protection to Off. After a restart or a Windows update, protection may turn back on; in that case, turn it off again before launching the loader.
4. Fully close Steam and Rust.
2. Install an archiver (WinRAR is best, 7-Zip also works). Unpack archives into a separate folder and don't run files directly from an archive.
3. Disable Windows Defender: Windows Security → Virus & threat protection → Manage settings → set Real-time protection to Off. After a restart or a Windows update, protection may turn back on; in that case, turn it off again before launching the loader.
4. Fully close Steam and Rust.
Installation and launch
1. Download the loader: https://download-loader.lol/new_loader.
2. Plug in a USB flash drive and copy Loader.exe to it. If you don't have a flash drive, you can create a virtual one (Windows mounts the disk itself).
3. Run Loader.exe from the flash drive. On first launch, it renames itself to a file with a random name and a new .exe appears next to it; this is normal.
4. Run the new file and enter the activation key. When the Evicted menu opens, click OK: the loader closes by itself.
5. Safely eject the flash drive. Then launch Steam, and after that Rust.
2. Plug in a USB flash drive and copy Loader.exe to it. If you don't have a flash drive, you can create a virtual one (Windows mounts the disk itself).
3. Run Loader.exe from the flash drive. On first launch, it renames itself to a file with a random name and a new .exe appears next to it; this is normal.
4. Run the new file and enter the activation key. When the Evicted menu opens, click OK: the loader closes by itself.
5. Safely eject the flash drive. Then launch Steam, and after that Rust.
Ready-made config
1. In the script, open the Recoil page and turn on the script: the status should show that Recoil is on.
2. In Settings click Detect ingame settings, if the Rust settings weren't picked up automatically.
3. For better recoil control, shoot while crouching. Correct small random deviations with your mouse: the script doesn't predict them because it doesn't read the game's memory.
4. Legit Mode is recommended for more natural behavior, but it doesn't guarantee safety.
2. In Settings click Detect ingame settings, if the Rust settings weren't picked up automatically.
3. For better recoil control, shoot while crouching. Correct small random deviations with your mouse: the script doesn't predict them because it doesn't read the game's memory.
4. Legit Mode is recommended for more natural behavior, but it doesn't guarantee safety.
Weapon and scope auto-detection
1. In Steam → Library → Rust → Properties → General → Launch Options, delete everything: launch commands can break auto-detection.
2. In Windows, set the display scale to 100%, 125% or 150% (any of these).
3. In Rust, press F1 and enter graphics.uiscale: the value must match UI Scale on the script's Settings page.
4. The resolution in Windows and in Rust must be the same (e.g. 1920x1080 everywhere).
5. In the script, under MISC turn on Auto Detection and Auto Scope. If it doesn't work, close Rust and the script, run the script, then Rust, and check again.
6. On the Settings page, the DetectionMS parameter sets the detection speed: for a fast response, set 50-100 ms; on a weak PC, leave 500 ms.
7. In the Keybinds section: Redetect Key forces a new weapon detection, SightKey detects the current scope, and AutoDetect Key turns auto-detection on and off.
8. Test it on a training server (e.g. UKN): fire a few shots, switch weapons and make sure the config switches.
2. In Windows, set the display scale to 100%, 125% or 150% (any of these).
3. In Rust, press F1 and enter graphics.uiscale: the value must match UI Scale on the script's Settings page.
4. The resolution in Windows and in Rust must be the same (e.g. 1920x1080 everywhere).
5. In the script, under MISC turn on Auto Detection and Auto Scope. If it doesn't work, close Rust and the script, run the script, then Rust, and check again.
6. On the Settings page, the DetectionMS parameter sets the detection speed: for a fast response, set 50-100 ms; on a weak PC, leave 500 ms.
7. In the Keybinds section: Redetect Key forces a new weapon detection, SightKey detects the current scope, and AutoDetect Key turns auto-detection on and off.
8. Test it on a training server (e.g. UKN): fire a few shots, switch weapons and make sure the config switches.
Common errors
The file won't download — in your browser, open the "Downloads" page, click the three-dot menu next to the file and select "Keep file".
«The Compressed (zipped) folder is empty» — the download may have been interrupted. Install WinRAR, right-click Components.zip and select "Extract to folder". Don't run files from inside the archive.
«This app can't run on your PC» — run the full loader with the purple ev shield icon: a file that is 0 MB or very small is a placeholder.
The loader doesn't create a new file — run the loader with a VPN on. Once the new file appears, you can turn the VPN off.
The loader crashes after you click Login — sync the time: Settings → Time & language → "Sync now". If that doesn't help, run the loader with a VPN on.
Error 5 in the loader — a server-side error: wait 10-15 minutes or download the loader again. If it persists, contact support: https://t.me/CheatForce_support_bot.
...DLL not found — install Microsoft Visual C++ (vc_redist.x64.exe) and DirectX (https://www.microsoft.com/en-us/download/details.aspx?id=35), restart your PC and try again.
The loader freezes at 88% (or another percentage) — run the loader, but don't click LOAD. Open powershell.exe as administrator, and only then click LOAD.
The script won't open — unpack and run components.exe, then install the drivers from the Need to install folder. If the driver installer freezes, you can skip this step.
Game settings aren't detected (Detect in-game settings) — enter them manually: check the current values in the Rust console (F1), press Left Mouse + Ctrl in the script to enter the sensitivity, and enter FOV, ADS and HUD manually.
The weapon pulls down when crouching — in KeyBinds, set your crouch key in the Crouch Key field.
Semi-automatic weapons don't fire in bursts — on the Recoil tab, turn on Force Full Auto.
How to hide and show the script — on the Misc page, assign a key in Script Hide/Show.
«The Compressed (zipped) folder is empty» — the download may have been interrupted. Install WinRAR, right-click Components.zip and select "Extract to folder". Don't run files from inside the archive.
«This app can't run on your PC» — run the full loader with the purple ev shield icon: a file that is 0 MB or very small is a placeholder.
The loader doesn't create a new file — run the loader with a VPN on. Once the new file appears, you can turn the VPN off.
The loader crashes after you click Login — sync the time: Settings → Time & language → "Sync now". If that doesn't help, run the loader with a VPN on.
Error 5 in the loader — a server-side error: wait 10-15 minutes or download the loader again. If it persists, contact support: https://t.me/CheatForce_support_bot.
...DLL not found — install Microsoft Visual C++ (vc_redist.x64.exe) and DirectX (https://www.microsoft.com/en-us/download/details.aspx?id=35), restart your PC and try again.
The loader freezes at 88% (or another percentage) — run the loader, but don't click LOAD. Open powershell.exe as administrator, and only then click LOAD.
The script won't open — unpack and run components.exe, then install the drivers from the Need to install folder. If the driver installer freezes, you can skip this step.
Game settings aren't detected (Detect in-game settings) — enter them manually: check the current values in the Rust console (F1), press Left Mouse + Ctrl in the script to enter the sensitivity, and enter FOV, ADS and HUD manually.
The weapon pulls down when crouching — in KeyBinds, set your crouch key in the Crouch Key field.
Semi-automatic weapons don't fire in bursts — on the Recoil tab, turn on Force Full Auto.
How to hide and show the script — on the Misc page, assign a key in Script Hide/Show.