Ubgg Spoofer setup guide

1. A clean Windows installed from a USB flash drive. Official images and the Media Creation Tool: Windows 10, Windows 11. Reinstalling erases all data. In the tool, create an ISO, write it to a flash drive of 8 GB or more (with Rufus), boot from it (Shift + "Restart" → "Use a device"), and choose Windows 10 Pro, "I don't have a product key", "Custom: Install Windows only (advanced)".
2. On the disk selection screen, press Shift+F10, type diskpart, and then for each disk except the flash drive, select disk # and clean. The flash drive is usually the last disk in the list; don't clean it. Close the console, click "Refresh", select the main disk and click "Next".
3. On the new system, never sign in to a Microsoft account and never activate Windows with a license key: this ties the device to a Microsoft ID and can link the new hardware to the old one.
4. Download the set of programs FereM Suite (it contains the loader and all the utilities you need: dControl, Wub, Visual C++, DirectX, the checker, Debug.exe, DeviceCleanup). From Russia, the files are downloaded via VPN. Also use a VPN while working with the spoofer, otherwise you risk damaging Windows.

1. Disable Windows Defender: Start → "Windows Security" → "Virus & threat protection" → "Manage settings" → turn off Real-time protection. Or run dControl.exe from the set and turn off Defender.
2. Disable Windows updates: run Wub_x64.exe from the set, choose to disable updates and click "Apply Now".
3. Install fresh graphics drivers. NVIDIA: via NVCleanstall from the set, without Telemetry and GeForce Experience, a clean install of the driver only. AMD: if the Factory Reset option is available, use it and install the driver only. Restart your PC after installing.
4. In the display settings, set the resolution and refresh rate you will play at (for each monitor) and don't change them after the spoof, or the anti-cheat will notice the mismatch.
5. Install Visual C++ Runtimes All-In-One from the set: extract the archive, run install_all.bat as administrator and restart your PC. Then install DirectX from the set (untick "Install the Bing Bar" and keep clicking "Next").

1. Flashing the BIOS is required. Find your board's model and manufacturer via msinfo32 (BaseBoard Product and Manufacturer) and write down the BIOS version and date. Download a different BIOS version from the manufacturer's website (preferably one below the current one), format a flash drive as FAT32 and flash the BIOS twice in a row (the same version twice). For ASUS, a separate tool from the developer's guide must be run first, so if you have ASUS, contact support https://t.me/CheatForce_support_bot.
2. Enter the BIOS in Advanced mode and enable TPM (Security Device Support = Enabled): fTPM for AMD, PTT for Intel.
3. Enable Secure Boot and run Restore Factory Boot Keys. Disable CSM: with CSM enabled, the serial numbers may revert to the originals.
4. Disable Fast Boot and the manufacturer's auto-install utilities (ASUS Armoury Crate, MSI Driver Utility Installer, Gigabyte Utilities Downloader). On AMD boards, also enable NX Mode. Item names and paths depend on the board manufacturer. Save and exit (F10).
5. In Windows, check: msinfo32 → Secure Boot State = On; tpm.msc → the TPM is present.

1. Activate the key you were given on the page https://activatekey.xyz/login.php.
2. Open the checker from the set once so that it saves your original serial numbers. Do this first, and only then spoof.
3. Extract the UBGG Perm loader from the set to the desktop.
4. Do the device setup from the card below (network adapters, DNS, DeviceCleanup).

1. Run the loader, enter your key, tick "Remember me" and log in.
2. Enable Ethernet Spoof. GPU Spoof is usually not needed, but may be required for games like Apex Legends.
3. Press Permanent Spoof and choose Other (Driver Only) in the pop-up window.
4. When the green "Spoofed" message appears, restart your PC.
5. Open the checker and compare the serial numbers: it shows which components have changed and which have not.
6. For EAC games (including Fortnite), first open Debug.exe and click TPM FORTNITE, then spoof. Between spoofs after a ban or kick, wait 24 hours and change your IP.
7. For Valorant and LoL (Vanguard), in Debug.exe click Disable TPM Spoofing. Before running the loader, you must do the fTPM spoof (it has a separate developer guide, contact support https://t.me/CheatForce_support_bot). GPU Spoof is off for Vanguard; turn it on only for a VAL5 delay ban.

1. Use this method only when the disks or other serial numbers stayed the same. First unload the spoofer driver (see "Re-spoofing and unloading the driver").
2. Open Debug.exe and click Unlock Advanced mode.
3. Run the loader, enter your key ("Remember me") and log in. Turn on Ethernet Spoof, and GPU Spoof if needed.
4. In the UEFI section, click Driver Spoof, choose your motherboard and click Spoof.
5. Restart your PC and compare the serial numbers in the checker.

1. Press Win+R, type ncpa.cpl, open your connection's properties and adjust the settings. Do this for every network adapter in the system, not just the active one.
2. In Command Prompt as administrator, run these one by one: ipconfig /flushdns, ipconfig /release, ipconfig /renew.
3. Run DeviceCleanup.exe from the set as administrator, select all devices (Ctrl+A), right-click → Remove Devices, confirm and restart your PC.
4. After spoofing and checking the serials, run Debug.exe and click Clean spoofer traces. Wait 2 minutes (nothing will appear in the console) and restart your PC, then delete Debug.exe.
5. Don't sign in to programs that require a login: Logitech G HUB, GeForce Experience, Razer, Medal, Microsoft, OneDrive, SteelSeries. Don't use an account that got a 24-hour ban or a VPN kick; use a new one.

1. If you get an error when spoofing again, you need to unload the driver. This removes the spoofer from your PC and restores the original serial numbers.
2. Open Debug.exe, click Unload Driver and restart your computer.