Instructions
Covcheg setup guide for Escape from Tarkov
Covcheg • Escape from Tarkov
Launching COVCHEG for Escape from Tarkov: first prepare your system (the first card), then open your game's card and follow it in order.
Instructions
First prepare your system (the first card), then open your game's card and follow it in order. Steps for other games won't work for you. The loader runs from a removable flash drive, and you must physically remove the flash drive before starting the game.
System preparation
1. Virtualization in BIOS must be enabled. To check: Task Manager → Performance → CPU, at the bottom it should say "Virtualization: Enabled".
2. Enable Hyper-V: Control Panel → Programs and Features → Turn Windows features on or off, check Hyper-V, click OK and restart your computer. If Hyper-V is not in the list, download the installer BAT file Hyper-V Installer, run it as administrator and restart your PC.
3. The system drive must use GPT (in the disk properties: "Partition style: GUID Partition Table (GPT)"). If yours is MBR, convert the disk to GPT or reinstall Windows in UEFI/GPT mode.
4. The BIOS boot mode must be UEFI (not Legacy or CSM). You can check it in msinfo32 (WIN+R): "BIOS Mode: UEFI".
5. Secure Boot must be disabled in BIOS. In msinfo32 it should say "Secure Boot State: Off".
6. Run Loader → Configs and check the statuses: if everything is set up correctly, the main items are green. If anything is red, contact our support: https://t.me/CheatForce_support_bot.
2. Enable Hyper-V: Control Panel → Programs and Features → Turn Windows features on or off, check Hyper-V, click OK and restart your computer. If Hyper-V is not in the list, download the installer BAT file Hyper-V Installer, run it as administrator and restart your PC.
3. The system drive must use GPT (in the disk properties: "Partition style: GUID Partition Table (GPT)"). If yours is MBR, convert the disk to GPT or reinstall Windows in UEFI/GPT mode.
4. The BIOS boot mode must be UEFI (not Legacy or CSM). You can check it in msinfo32 (WIN+R): "BIOS Mode: UEFI".
5. Secure Boot must be disabled in BIOS. In msinfo32 it should say "Secure Boot State: Off".
6. Run Loader → Configs and check the statuses: if everything is set up correctly, the main items are green. If anything is red, contact our support: https://t.me/CheatForce_support_bot.
Rust External
1. Download the loader: https://covcheg.orion-security.pro/launcher. Move it to a USB flash drive and delete it from "Downloads" and any other folders on your PC.
2. Fully close Steam via its tray icon ("Exit Steam"). Do this before every loader launch.
3. Run the loader from the flash drive and press Launch. When the loader offers to restart the computer, press Yes. Once the loader closes and its tray icon disappears, remove the flash drive.
4. After the restart, install AnyDesk (https://anydesk.com/en/downloads/thank-you?dv=win_exe), open it, click the red record button, then stop the recording.
5. Insert the flash drive again, close Steam via the tray, run the loader, press Launch and wait for the loader window to close.
6. When the message "Start the game and press F5 in game main menu" appears, press OK and remove the flash drive.
7. Launch Rust and in the game's main menu press F5 and wait for the product menu.
2. Fully close Steam via its tray icon ("Exit Steam"). Do this before every loader launch.
3. Run the loader from the flash drive and press Launch. When the loader offers to restart the computer, press Yes. Once the loader closes and its tray icon disappears, remove the flash drive.
4. After the restart, install AnyDesk (https://anydesk.com/en/downloads/thank-you?dv=win_exe), open it, click the red record button, then stop the recording.
5. Insert the flash drive again, close Steam via the tray, run the loader, press Launch and wait for the loader window to close.
6. When the message "Start the game and press F5 in game main menu" appears, press OK and remove the flash drive.
7. Launch Rust and in the game's main menu press F5 and wait for the product menu.
PUBG: Battlegrounds
1. In the game's graphics settings, set the mode to DirectX 11 Enhanced.
2. Download the loader: download. Unpack all files into one folder on a USB flash drive. If you don't have a flash drive, you can create a virtual one with OSFMount.
3. Run loader.exe, enter your key, select the game and click Launch. Follow the loader's prompts and launch the game. Don't press F2 in the loader at this stage.
4. Once the game's main menu loads, install OBS 25.0.8 specifically: OBS-Studio-25.0.8-Full-Installer-x64.exe, run it as administrator. No other version will work.
5. In OBS: Sources → + → Game Capture, mode Capture specific window, window TslGame.exe, OK. Wait until the game picture appears in OBS. If there's no picture, restart OBS as administrator.
6. AMD and Intel graphics cards only: install Action! Screen Recorder (action_4_39_1_setup.exe), and while in the game's main menu, run it, select "Games" mode and wait for the FPS counter in the top right corner. NVIDIA users skip this step.
7. In the loader window, press F5 and follow its messages. If "Change game window mode and Press F5" appears, change the resolution in the game settings (for example, from 1920×1080 to 1680×1050 or the other way around), apply it and press F5 in the loader again.
8. The loader will tell you when it has loaded successfully; no extra setup is needed.
2. Download the loader: download. Unpack all files into one folder on a USB flash drive. If you don't have a flash drive, you can create a virtual one with OSFMount.
3. Run loader.exe, enter your key, select the game and click Launch. Follow the loader's prompts and launch the game. Don't press F2 in the loader at this stage.
4. Once the game's main menu loads, install OBS 25.0.8 specifically: OBS-Studio-25.0.8-Full-Installer-x64.exe, run it as administrator. No other version will work.
5. In OBS: Sources → + → Game Capture, mode Capture specific window, window TslGame.exe, OK. Wait until the game picture appears in OBS. If there's no picture, restart OBS as administrator.
6. AMD and Intel graphics cards only: install Action! Screen Recorder (action_4_39_1_setup.exe), and while in the game's main menu, run it, select "Games" mode and wait for the FPS counter in the top right corner. NVIDIA users skip this step.
7. In the loader window, press F5 and follow its messages. If "Change game window mode and Press F5" appears, change the resolution in the game settings (for example, from 1920×1080 to 1680×1050 or the other way around), apply it and press F5 in the loader again.
8. The loader will tell you when it has loaded successfully; no extra setup is needed.
DayZ
1. You need OBS Studio version 24.0.3 specifically. If you have a newer one, uninstall it first. Download: OBS 24.0.3.
2. Download the loader: https://disk.yandex.ru/d/2Ivm38MyBA3NWQ. Run it, enter your key, select DayZ and click START.
3. Wait for the "Waiting for game" message and launch DayZ. Don't press F5 at this stage.
4. Run OBS as administrator: Sources → + → Game Capture, mode Capture specific window, window DayZ_x64.exe, OK. Wait for the game picture to appear in OBS.
5. In the DayZ main menu, press this key once: F5. The game window must be the active one at that moment, not the loader or OBS.
6. If the loader asks "Switch window mode and press F5 again", switch the game's display mode to any other one (fullscreen, borderless, windowed), apply it, switch back to the previous mode if you like, and press F5 once more in the main menu.
2. Download the loader: https://disk.yandex.ru/d/2Ivm38MyBA3NWQ. Run it, enter your key, select DayZ and click START.
3. Wait for the "Waiting for game" message and launch DayZ. Don't press F5 at this stage.
4. Run OBS as administrator: Sources → + → Game Capture, mode Capture specific window, window DayZ_x64.exe, OK. Wait for the game picture to appear in OBS.
5. In the DayZ main menu, press this key once: F5. The game window must be the active one at that moment, not the loader or OBS.
6. If the loader asks "Switch window mode and press F5 again", switch the game's display mode to any other one (fullscreen, borderless, windowed), apply it, switch back to the previous mode if you like, and press F5 once more in the main menu.
Valorant
1. Download the loader: https://disk.yandex.ru/d/rF152I005vWYdQ. Move it to a USB flash drive and delete it from "Downloads". Close Riot Client via its tray icon.
2. Run the loader from the flash drive, click Click to restart, and when asked to restart, answer Yes.
3. After the restart, install OBS 25.0.8 specifically, even if you already have OBS: OBS-Studio-25.0.8-Full-Installer-x64.exe. Don't update it. Run OBS as administrator.
4. Insert the flash drive again, close Riot Client via the tray, run the loader and press Launch. When "Start the game and press F5 in game main menu" appears, click OK and remove the flash drive.
5. Launch Valorant, open Discord and turn on "Legacy Overlay" in the game overlay settings. Wait for the "Legacy overlay initialized" message and the small overlay window in the game.
6. In OBS: Sources → + → Game Capture, mode Capture specific window, the Valorant window (the game must be running), OK. Wait for the game picture to appear.
7. In the Valorant settings, turn on windowed mode and set the resolution one step lower (for example, from 1920×1080 to 1680×1050). In the main menu, press this key once: F5. When the loader asks you to change the mode, set the original resolution back, apply it and press F5 once more.
8. Product menu sections are switched with Page Up / Page Down, not with the mouse wheel.
2. Run the loader from the flash drive, click Click to restart, and when asked to restart, answer Yes.
3. After the restart, install OBS 25.0.8 specifically, even if you already have OBS: OBS-Studio-25.0.8-Full-Installer-x64.exe. Don't update it. Run OBS as administrator.
4. Insert the flash drive again, close Riot Client via the tray, run the loader and press Launch. When "Start the game and press F5 in game main menu" appears, click OK and remove the flash drive.
5. Launch Valorant, open Discord and turn on "Legacy Overlay" in the game overlay settings. Wait for the "Legacy overlay initialized" message and the small overlay window in the game.
6. In OBS: Sources → + → Game Capture, mode Capture specific window, the Valorant window (the game must be running), OK. Wait for the game picture to appear.
7. In the Valorant settings, turn on windowed mode and set the resolution one step lower (for example, from 1920×1080 to 1680×1050). In the main menu, press this key once: F5. When the loader asks you to change the mode, set the original resolution back, apply it and press F5 once more.
8. Product menu sections are switched with Page Up / Page Down, not with the mouse wheel.
Delta Force
1. Download the loader: https://disk.yandex.ru/d/rF152I005vWYdQ. Move it to a USB flash drive and delete it from "Downloads".
2. Run the loader from the flash drive, click Click to restart, and when asked to restart, answer Yes.
3. After the restart, install OBS 25.0.8 specifically and don't update it: OBS-Studio-25.0.8-Full-Installer-x64.exe. Run OBS as administrator.
4. Insert the flash drive, run the loader, press Launch. When "Start the game and press F5 in game main menu" appears, click OK and remove the flash drive. Don't insert it again until you have fully exited the game.
5. Install RivaTuner Statistics Server (download). Settings: On-Screen Display zoom and Display palette → Alpha all the way to the left, FPS counter in the top left corner.
6. Switch Delta Force to windowed mode and launch the game. In OBS: Sources → + → Game Capture, mode Capture specific window, the window with the Delta Force process, OK.
7. In the game's main menu, tap F5 (don't hold it). If the loader asks "Change game window mode and press F5 again", switch the display mode to any other one, apply it, switch back to the one you need and press F5 once more.
2. Run the loader from the flash drive, click Click to restart, and when asked to restart, answer Yes.
3. After the restart, install OBS 25.0.8 specifically and don't update it: OBS-Studio-25.0.8-Full-Installer-x64.exe. Run OBS as administrator.
4. Insert the flash drive, run the loader, press Launch. When "Start the game and press F5 in game main menu" appears, click OK and remove the flash drive. Don't insert it again until you have fully exited the game.
5. Install RivaTuner Statistics Server (download). Settings: On-Screen Display zoom and Display palette → Alpha all the way to the left, FPS counter in the top left corner.
6. Switch Delta Force to windowed mode and launch the game. In OBS: Sources → + → Game Capture, mode Capture specific window, the window with the Delta Force process, OK.
7. In the game's main menu, tap F5 (don't hold it). If the loader asks "Change game window mode and press F5 again", switch the display mode to any other one, apply it, switch back to the one you need and press F5 once more.
Apex Legends
1. Download the loader: https://covcheg.orion-security.pro/launcher. Move it to a USB flash drive and fully close Steam via the tray ("Exit Steam"). Do this before every loader launch.
2. Run the loader from the flash drive, click Launch, and when asked to restart, answer Yes.
3. After the restart, insert the flash drive, close Steam via the tray, run the loader, press Launch and wait for the menu to close. When "Start the game and press F5 in game main menu" appears, remove the flash drive and press OK.
4. AMD and Intel graphics cards only: install Action! Screen Recorder (action_4_39_1_setup.exe), run it, then Apex Legends, and wait for the FPS counter in the top right corner.
5. Install OBS 25.0.8 specifically (OBS-Studio-25.0.8-Full-Installer-x64.exe), don't update it, and run it as administrator.
6. Launch Apex Legends in windowed mode. In OBS: Sources → + → Game Capture, mode Capture specific window, the process r5apex_dx12.exe, OK.
7. Install RivaTuner Statistics Server (download): On-Screen Display zoom all the way to the left, FPS counter in the top left corner, Application detection level — High, Display palette → Alpha all the way to the left (best changed after the product menu appears).
8. In the game's main menu, tap F5 (without holding it). If the loader asks "Change game window mode and press F5 again", switch the display mode to another one, apply it, switch back to the previous one if you like and press F5 again. If the game crashes when you change the mode, start RivaTuner only after the product menu appears.
2. Run the loader from the flash drive, click Launch, and when asked to restart, answer Yes.
3. After the restart, insert the flash drive, close Steam via the tray, run the loader, press Launch and wait for the menu to close. When "Start the game and press F5 in game main menu" appears, remove the flash drive and press OK.
4. AMD and Intel graphics cards only: install Action! Screen Recorder (action_4_39_1_setup.exe), run it, then Apex Legends, and wait for the FPS counter in the top right corner.
5. Install OBS 25.0.8 specifically (OBS-Studio-25.0.8-Full-Installer-x64.exe), don't update it, and run it as administrator.
6. Launch Apex Legends in windowed mode. In OBS: Sources → + → Game Capture, mode Capture specific window, the process r5apex_dx12.exe, OK.
7. Install RivaTuner Statistics Server (download): On-Screen Display zoom all the way to the left, FPS counter in the top left corner, Application detection level — High, Display palette → Alpha all the way to the left (best changed after the product menu appears).
8. In the game's main menu, tap F5 (without holding it). If the loader asks "Change game window mode and press F5 again", switch the display mode to another one, apply it, switch back to the previous one if you like and press F5 again. If the game crashes when you change the mode, start RivaTuner only after the product menu appears.
Rainbow Six Siege
1. Vanguard, FACEIT Anti-Cheat and Kaspersky Anti-Virus must be fully removed from the PC. NVIDIA graphics cards need driver version 591 or lower: NVIDIA driver.
2. Download the loader: https://disk.yandex.ru/d/YceRFJwPbeyk8g. Unpack all files into one folder on a USB flash drive.
3. Run loader.exe, enter your key, select the game and click Start. Launch the game following the loader's prompts. Don't press F5 at this stage. Once the game is running, remove the flash drive.
4. Install OBS 24.0.3 specifically and don't update it: OBS-Studio-24.0.3-Full-Installer-x64.exe. Run OBS as administrator.
5. In OBS: Game Capture → Create New → Capture Specific Window mode, window RainbowSix.exe. Wait for the game picture to appear.
6. While in the game's main menu itself (not in the settings or a match), press this key once: F5. If the loader asks "Change game window mode and Press F5", change the window mode in the game settings, go back to the main menu and press F5 again.
7. After a successful load, the loader closes. Activating Attacker: Operators → Attackers, hover the cursor over Striker (without clicking), wait for the model to appear on the right and press this key once: F1.
8. Activating Defender: open Defenders, hover the cursor over Bandit (without clicking), wait for the model on the right and press this key once: F1.
9. Test it at the shooting range. ESP is toggled on and off with F2.
2. Download the loader: https://disk.yandex.ru/d/YceRFJwPbeyk8g. Unpack all files into one folder on a USB flash drive.
3. Run loader.exe, enter your key, select the game and click Start. Launch the game following the loader's prompts. Don't press F5 at this stage. Once the game is running, remove the flash drive.
4. Install OBS 24.0.3 specifically and don't update it: OBS-Studio-24.0.3-Full-Installer-x64.exe. Run OBS as administrator.
5. In OBS: Game Capture → Create New → Capture Specific Window mode, window RainbowSix.exe. Wait for the game picture to appear.
6. While in the game's main menu itself (not in the settings or a match), press this key once: F5. If the loader asks "Change game window mode and Press F5", change the window mode in the game settings, go back to the main menu and press F5 again.
7. After a successful load, the loader closes. Activating Attacker: Operators → Attackers, hover the cursor over Striker (without clicking), wait for the model to appear on the right and press this key once: F1.
8. Activating Defender: open Defenders, hover the cursor over Bandit (without clicking), wait for the model on the right and press this key once: F1.
9. Test it at the shooting range. ESP is toggled on and off with F2.
Escape from Tarkov
1. You need OBS Studio version 24.0.3; uninstall any newer version first: OBS 24.0.3.
2. Download the loader: https://disk.yandex.ru/d/gFX1A3j6XgtKag. It's best to run it from a USB flash drive and remove the drive once the loader menu appears.
3. Run the loader, enter your key, select EFT and click START. Wait for "Waiting for game" and launch Escape from Tarkov. Don't press F5 at this stage.
4. Run OBS as administrator: Sources → + → Game Capture, mode Capture specific window, window EscapeFromTarkov.exe, OK.
5. In the game's main menu, tap F5 (don't hold it). If the loader asks "Switch window mode and press F5 again", switch the game's display mode to any other one, apply it, switch back to the previous one if you like and press F5 again.
2. Download the loader: https://disk.yandex.ru/d/gFX1A3j6XgtKag. It's best to run it from a USB flash drive and remove the drive once the loader menu appears.
3. Run the loader, enter your key, select EFT and click START. Wait for "Waiting for game" and launch Escape from Tarkov. Don't press F5 at this stage.
4. Run OBS as administrator: Sources → + → Game Capture, mode Capture specific window, window EscapeFromTarkov.exe, OK.
5. In the game's main menu, tap F5 (don't hold it). If the loader asks "Switch window mode and press F5 again", switch the game's display mode to any other one, apply it, switch back to the previous one if you like and press F5 again.