Shack Private setup guide for ARC Raiders

1. The loader is downloaded from the page https://telegra.ph/Shack-loader-01-22. When the loader updates, go to the same page: the current link is there.
2. Loader login: the one you entered at checkout. Password for the first login: firstlogin.
3. Uninstall TeamViewer, AnyDesk, Cheat Engine, Process Hacker, Wireshark, Proxifier, VPNs, the Bloody mouse software and any similar reverse-engineering and process-monitoring programs from your computer. Otherwise the loader may give you a temporary ban (You're banned error), and you'll have to wait for the automatic unban.
4. If you are in Russia or the CIS, uninstall all VPN programs and don't use a VPN while playing.
5. Run the game in borderless mode (Frameless Windowed), not fullscreen: fullscreen may cause injection errors.

1. Restart your PC and press the BIOS key several times (usually Delete, F2, F10 or Esc; it's shown at startup).
2. Fast Boot (Boot → Advanced or a similar section): switch Enabled to Disabled.
3. CSM Support (Boot → CSM Support / Launch CSM): switch it to Disabled and make sure the boot device shows as UEFI (for example, Windows Boot Manager). On some boards, the CSM option only appears after Secure Boot is disabled.
4. Secure Boot (Security → Authentication → Secure Boot): switch it to Disabled. If needed, change Boot Mode from Legacy to UEFI.
5. TPM (Security or Advanced → TPM Device / fTPM / PTT): switch it to Disabled.
6. Save the settings with F10 and confirm. If Windows won't boot, go back to BIOS and undo the last change (often CSM or Secure Boot). The exact location of the options depends on your board model.

1. For PUBG, turn on Steam Overlay: open Steam as administrator → Settings → In-Game → Enable the Steam Overlay while in-game. The overlay must be on before injection. If the game isn't in your Steam library, add it via Add a Game → Add a Non-Steam Game.
2. If the game doesn't launch through Steam (BSG Launcher, Origin, etc.), add its launcher to Steam as a non-Steam game and launch the game through Steam.
3. For some games, you need to install Overwolf (https://www.overwolf.com/) and turn on its overlay: without an active overlay, the injection may fail.
4. Run the loader, log in and wait for the window prompting you to inject. Then inject.
5. When the loader says "Please start the game", launch the game and log in as usual.

1. If you use a third-party spoofer, choose STATIC HWID spoof. Order: spoofer first, then the cheat, then the game.
2. If you use the built-in spoofer: run BE spoofer first, then the cheat, then the game. If you exited the game and want to run the cheat again, restart your PC, otherwise you'll get a WRONG HWID error.
3. To check that the spoof worked, in cmd as administrator run wmic diskdrive get serialnumber before and after the spoof. If the numbers differ, the spoof works.
4. The HWID binding may break after reinstalling Windows, replacing hardware, updating the system or changing BIOS. If you get a WRONG HWID error, contact support https://t.me/CheatForce_support_bot.

You're banned — the ban is given for detected remote access, debugging or monitoring programs. Uninstall them (see the list above) and contact support https://t.me/CheatForce_support_bot: you'll need your loader login and a unique HWID from a program that support will point you to.
Loader won't start (LoaderFix) — uninstall all Visual C++ versions and install the Visual C++ All-In-One pack; disable UAC; turn off Defender, Firewall, SmartScreen and Exploit Protection in Windows Security; turn Defender off again with dControl; disable Secure Boot, CSM, Fast Boot and TPM in BIOS; turn off Hyper-V and Virtual Machine in "Programs and Features" (Win+R → appwiz.cpl). Then restart your PC.
Fix Error SS 01 / SS 02 — the WdFilter service isn't running. Open System Informer as administrator, Services tab, find WdFilter: its status should be Running (if it's stopped, click Start), and in Properties set Startup Type: Automatic. If WdFilter isn't in the list, Windows Defender is disabled. Restart your PC after the changes.
Blue screen (BSOD) — in cmd as administrator, run sfc /scannow, then dism /online /cleanup-image /restorehealth, and restart your PC. If that doesn't help, reinstall Windows.
PUBG: no menu or the cheat doesn't inject — run Steam as administrator with Overlay on. Delete the Binaries folder in PUBG\TslGame\ and verify the file integrity in Steam twice. Run LoaderFix, disable UAC, set DirectX 11 in the game settings and close the game. In cmd as administrator, run icacls on the PUBG\TslGame\Binaries\Win64 folder with the /reset /T /C /L /Q parameters. Then inject again and launch the game.
PUBG: MapNew error window — set DirectX 11 in the game settings.
PUBG: loader stuck on Retrieving Data — make sure only one copy of PUBG is installed and that the game is on the same drive as Steam. If that doesn't help, contact support https://t.me/CheatForce_support_bot.
PUBG: ERROR Faxineira — keep only one PUBG installation folder. If that doesn't help, uninstall the game from all drives and reinstall Windows.
PUBG: ERROR Battleye Failed! — reinstall BE Service (BattlEye) in the game folder and inject again: Steam as administrator, Overlay on, DirectX 11 in the game.
PUBG: black screen after injection — Settings → System → Display → "Change default graphics settings": turn off Hardware-accelerated GPU scheduling and Optimizations for windowed games.
Albion Online: no login button after accepting the terms — install Albion Online on your phone, log into your account in the mobile app, log out of the game on the phone, then launch the game on PC again and log in.
Albion Online: radar — unpack the archive, move the files into the spk folder and put the spk folder in "Documents" (final path Documents\spk\), then inject.